DMT Presenter Control Guía de usuario descargar pdf (Pagina 50)

S1 User Handbook

ADVANCED CONFIGURATIONS

Channel Information Box:

This displays the input options of the channel and allows you to change the alias text on the

main screen. To select another channel, use the drop down box.

Global Talkback Box:

This allows you to enable or disable Global Talkback mode for a particular input on the

channel. See page 28 for more information on global talkback.

PFL Button Box

Cancel PFL on Fader:

When enabled, the PFL for the channel is turned o when the channel becomes routed (On

& fader up)

T/B Enabled (channels 5 & 6 only):

When disabled, the PFL is not routed to the talkback interface unless the CUE/PFL & TB

button is held down. If the CUE/PFL & TB button is on (routing to PFL), it will ash to indicate

this and solid to indicate it is being routed to the talkback interface.

Button Lock Box:

Locks the buttons on the desk in their current state. For channels 3 & 4 it is possible to

restrict the operator to Mic & Mono Line inputs or Mic & Stereo Line inputs.

Monitor Mute Box

This allows you to congure which inputs have the ability to mute the control room monitor

output when the channel is routed to the program output.

Remotes Setup Box

Remote input/output options are congured for inputs 1 & 2 independently. The current

input displayed can be changed using the drop down box.

Mode:

This allows you to set the conditions for the remote output to be active

• RemotesDisabled–Remoteoutputsareneverstartedorstopped.

• StartfromON&FaderUp–StartedwhentheONbuttonisactiveandthefaderisup.

Stopped when the fader is down or the ON button is deactivated.

• TelcoMode(StartsonONpress)–StartedwhentheONbuttonisactivated.Stopped

when the ON button is deactivated.

• StartfromON&FaderUporCUE/PFL–AsperStartfromON&FaderUpbutwiththe

addition of being started when the CUE/PFL button is activated and stopped when it

is deactivated.

• TelcoModewithCUE/PFL–AsperTelcoModebutwiththeadditionofbeingstarted

when the CUE/PFL button is activated and stopped when it is deactivated.

Start Function:

This sets whether the Start function is continuous (remains active) or momentary (active for

a approximately half a second)

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Sin comentarios

DMT Presenter Control Guía de usuario Pagina 50