DMT Presenter Control Guía de usuario descargar pdf (Pagina 47)

S1 User Handbook

ADVANCED CONFIGURATIONS

User Guide – Section 4-3 SCi and the S1

Sonifex SCi software is free of charge software available to

control and congure the S1 Mixer, as well as a plethora of

other Sonifex products, using RS-232 connections. The S1

Mixer is supported in version 1.110 and above.

Download the latest SCi Software

This is located on the Sonifex website in the Sonifex

Downloads section: http://www.sonifex.co.uk/technical/

software

Download and install the software.

Connecting the RS-232 Serial Port:

Simply connect the S1 Mixer to your computer using a serial

cable, or USB to RS-232 adapter, to be ready for operation.

Using SCi for the rst time:

Once the S1 Mixer is connected to the computer, launch SCi.

The rst thing to appear will be the SCi Launcher.

Click on the large plus button and the software will try and

communicate with the relevant serial ports to discover any

Sonifex products connected. The S1 Mixer will be shown in

the list. If they are not listed, check the cable between the S1

Mixer and the computer. Close the device list and the S1 Mixer

should now be in the launcher.

Double click the S1 Mixer to launch the S1 SCi interface.

SCi for S1

SCi allows the user control and congure the S1 Mixer remotely via RS-232. When using

SCi for the S1 Mixer, itshould not be run with a display resolution less than 1024x768.

1280x1024 is recommended.

The user interface consists of the main screen showing the status of the mixing desk and

conguration screens for individual channels, system settings and GPIO.

Fig 4-1: RS-232

Serial Port

Fig 4-2: SCi Launcher

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 79 80

Sin comentarios

DMT Presenter Control Guía de usuario Pagina 47