DMT Presenter Control Guía de usuario descargar pdf (Pagina 22)

S1 User Handbook

USER GUIDE

Channels 1 and 2 Mic / Line Inputs

The Mic/Line Input channel is a mono input with

a button switch to select either Mic or Mono Line.

Channel 1 is used for the presenter’s mic and

is the source for talkback. The Talkback source

can be set to come from either the Mic or the

Line source irrespective of the channel input

selection.

Channels 3 and 4 - Mic / Mono Line /

Stereo Line Inputs

The Mic/Mono Line/Stereo line Input channel is

a stereo input channel with a button switch to

select either Mic, Mono Line or Stereo Line. The

stereo line is fed through a jack connector which

is found in the centre of the XLR line connectors.

Channel 5 - Mic / Telco Input

The telco channel is used to interface the S1

with a telephone hybrid unit. The hybrid unit is

connected through an XLR with a Microphone

channel provided as an alternative. The telco

channel connector group also contains a

cleanfeed output via XLR to return to the Hybrid.

Channel 6 – Stereo Line / Stereo

Cleanfeed Input

The Stereo Cleanfeed channel has one balanced

stereo input and a balanced stereo cleanfeed

input, on XLR connectors. The channel is

intended for use where a remote stereo source,

such as another studio connected via ISDN,

requires a stereo cleanfeed return. The cleanfeed

is generated by a separate stereo cleanfeed bus

which follows the PGM output routing matrix.

Fig 2-5: Channels 1 and 2 Mic /

Line Inputs

Fig 2-6: Channels 3 and 4 - Mic /

Mono Line / Stereo Line Inputs

Fig 2-7: Channel 5 - Mic /

Telco Input

Fig 2-8: Channel 6 – Stereo Line /

Stereo Cleanfeed Input

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Sin comentarios

DMT Presenter Control Guía de usuario Pagina 22